Pump cranes

Filling a tanker equipped with a pump crane is easy and fast – the entire process can be handled without ever leaving the tractor. The pump cranes can be mounted on all Livakka slurry tanker models. The right model for each use can surely be found from among the three alternatives. All our pump crane models can be fitted with a transfer pumping function, which allows slurry to be discharged into a storage pond or similar using the pump crane.

Pump crane boom geometry is carefully considered . Filling can also be done from wells with small openings. Finnish-made Mäki-Reini submersible pumps, which are renowned for their quality and features, are used on the pump cranes. A special feature of our submersible pumps is a check valve, which prevents the slurry from entering the tractor’s hydraulic system in the event of a hose rupture.

 

5″ AND 6″ FRONT-MOUNTED PUMP CRANE

5″ and 6″ front-mounted pump crane is mounted on the front of the drawbar by plate fitting. Because of plate fitting, it can also be easily retrofitted on older slurry tanker models. Filling on the right side of the tanker.

 

Front-mounted pump crane

5″.

Extension 3 m from the ground surface down.

Pump output 5000 l/min with water.

Hydraulic requirement: min.50 l/150 bar.

Filling hose 5″, foam hose 4″.

 

6″.

Extension 3 m from the ground surface down.

Pump output 12 000 l/min with water.

Hydraulic requirement: min. 60 l / 200 bar.

Filling hose 6″, foam hose 4″.

 

 

 

6″ SIDE-MOUNTED PUMP CRANE

6″ side-mounted pump crane is mounted on the right side of tanker by plate fitting.

 

Side-mounted pump cranewidth=

Filling on the right side of the tanker.

Extension 3,5 m from the ground surface down.

Pump output 12 000 l/min with water.

Hydraulic requirement: min. 60 l / 200 bar.

Filling hose 6″.

Foam hose 4″.

 

 

 

 

8″ CENTRE-MOUNTED PUMP CRANE WITH TELESCOPIC ARM

Centre-mounted pump crane allows to fill on both sides of the tanker. The boom structure has a lower centre of gravity, while the telescopic arm offers user-friendly operation and a smaller footprint for transport. These features make the entire unit more compact in appearance and more stable when being drawn by a tractor. Boom rotation is done with sturdy gear wheel.

 

Centre-mounted pump crane

Filling on both sides of the tanker.

Extension 4 m from the ground surface down.

Pump output 20 000 l/min with water.

Hydraulic requirement:min. 70 l / 200 bar.

Filling hose 8″.

Foam hose 6″.

Telescopic arm

Centre-mounted pump crane with telescopic arm.