Kivi-Pekka ROLLER 700


The KIVI-PEKKA roller is a new design to work on grasslands and fields which easily gets broken by other roller types.

The special made rubber drum avoids damages when hitting a stone and soften hits on the bearings. With this construction we save those damages on the Cambridge rollers and bearings, also a lot in time and money ! With the KIVI-PEKKA roller You achieve a normal , leveled field construction and pushes the rocks back in the ground.

The roller is built in three sections. The transport happens on the middle drum. The wings are folded by hydraulics to the sides. They also press the out standings rollers on the ground to get the same ground pressure and are supported by accumulators, when hitting a rock. As an extra you can choose between hay tines and brake tines which You put in the front.

A pneumatic seeding unit with 8 feeding pipes can be adjusted with a 79.25 gal or 132.08 gal which automatically, not depending on the working speed, seeds the field. A 132.08 gal tank is equipped with 16 feeding pipes.

The hay and brake tines helps also to enlengthen the lifetime of Your grass. Also all types of small seeds can be used on the KIVI-PEKKA 700. The hydraulically steared front tines open the fields surface with care, and ensures the seeds good contact with the ground. The roller then presses the seed on the ground.

The hydraulic adjusted front tines and brakes make it in some cases possible, to left along other working steps. Example You seed directly after ploughing with this machine.


Roller unit

The rubber roller is constructed to take knocks and also to work in rough conditions. This allows you to maintain a uniform speed during work.


The roller is built in three sections. The machine is transported on the central drum. Accumulators guarantee pressure on the ground and soften knocks to the bearings. The durable construction of the rollers allows You to maintain a high working speed.

Spreader unit

The manufacturer  of the spreading unit is APV from Austria. We deliver the models with 79.25 gal or 132.08 gal. Seed is sown  electronically. In the 211.33 gal model the seed is sown hydraulically. All units are fitted with different types of sowing wheels (small and big seed).

Control box

The manual is available in English, French and Italian language. Sensors are fitted  to the end  of the drum.

Types of Hay Tines available

Front Brakes

Nurmijyrän hankinnan perusteet

kustannus säästöt kallis nurmen uusiminen mahdollista tehdä harvemmin lisäämällä elinvoimaista siementä, täysi kasvusto joka vuosi kasvuston laatu parempi, kun rikat ei valtaa elintilaa keväällä ajettaessa edellisen vuoden kuloheinä auki, nopeampi kasvuun lähtö työleveys, nopea ja tehokas tehdä isojakin aloja monikäyttöisyys, voi tehdä myös mulloksen jyräykset monikäyttöisyys, voi kylvää rypsit, rapsit, luonnonhoitopellot yms. sopii hyvin porukka koneeksi


Technical details

Power requirements min. 70 hp min. 120 hp
Hydraulic outputs 3 x double function 3 x double function
Transport width 116.14 in 116.14 in
Diameter of the roller 212.59 in 212.59 in
Number of tines 71/54 pcs 0 pcs
Distance between tines 0.39/2.55 (in) 9.84 (in)
Number of brakes 0 pcs 28 pcs
Weight 6 790 lb 6 966 lb

Standard equipment

  • Full rubber roller
  • Back lights
  • Accumulators as suspension

Optional extras

  • PS 300 sowing unit (electronically)
  • PS 500 sowing unit (electronically)
  • PS 800 sowing unit (pneumatic)
  • hydraulic leveling board with
  • different tines
  • leveling board in front of the tines