Casa Grande, AZ
American Falls, ID
Twin Falls, ID
Toll Free: (800) 825-2401
5297 W Stoney Corners Rd
McBain, MI 49657
Phone: (231) 825-2416
210 Dilts Rd
Ithaca, MI 48847
Phone: (989) 436-8181
Bad Axe, Mi
Sauk Centre, Minnesota
Fergus Falls, MN
New Mexico location
Adams Center, New York
North Dakota locations
South Dakota locations
St. George, UT
New Haven, Vermont
Kivi-Pekka rock picker is designed to remove stones and other solid objects from all types of soil. It removes stones efficiently and clears new fields of tree roots and branches. In addition to fields, Kivi-Pekka can be used for road foundation work, golf courses and landscaping.
Stones are traditionally removed from fields by collecting them by hand. This is not only time-consuming but, at worst, puts people’s health at risk due to poor working postures. To make matters worse, the end result is never as good as that attained by mechanical removal. Thoroughly cleared fields yield a better harvest, prevent damage to other farming machinery and lower repair costs.
Kivi-Pekka stone picker is more efficient solution than stone rakes and stone buriers. Kivi-Pekka’s performance is in a class of its own: the largest model is able to collect stones from an area 7 metres wide. Output is up to 1500 kg per minute. The 290 cm tipping height allows the stones to be tipped even onto high dump trucks.
The durability of the machine has been achieved as a result of progressive product development over the past 35 years. The right materials and the best components keep running costs low.
Soil collection allows the topsoil to end up back in the field. Cleaned rocks can be used in construction or road building, for instance.
Kivi-Pekka separates the soil over three stages:
1. Stone enters the machine over the sieve located under the lifting drum.
2. Stone is carried to the tank, and the soil in the sieve structure is released back to the field.
3. Any left-over soil slides into a separate container located behind the back wall of the stone tank, and gets released at the tipping stage.
The welded sieve is made of special-alloy steel and is available with different spacings. The tines run between the sieve bars the entire length, thus keeping the sieve clean and preventing jamming of rocks.
The lifting action is achieved with a hydraulic cylinder, which raises the rakes simultaneously. Mechanical locks secure them into the top position. The operator is able to position the picker in working or transport position from the cab.
All tine sizes give way sideways to prevent blockages. No backwards rotation is hence required. The 12×45 tines are particularly durable and contribute to extended maintenance intervals. All tines are fitted with auxiliary springs and suspended with rubber buffers.
Kirjoita sähköpostiosoitteesi alle ja saat ensimmäisenä PEL-Tuote Oy:n kuumimmat uutiset ja tiedot uutuuksista! Spämmiksi asti ei postia kerry.